ABB Thermal Mass Flow Meter

ABOUT THIS PRODUCT

The ABB FMT430 Thermal Mass Flowmeter, part of ABB’s SensyMaster series, performs precise and dynamic direct mass flow measurements of gases in low and medium pressure conditions to meet the needs of all industrial standard applications. Offered in integral and remote mount design along with single or dual-compartment housing. High quality thermal sensor elements and powerful electronics allow for quick commission and longer maintenance cycles making the FMT430 low cost of operation, high system availability and precise measurement of gas.

ABB’s FMT430 is renowned for its reliability, efficiency, and advanced features that meet the demands of modern industry. Its precise measurement capabilities reduce process inefficiencies, optimize resource usage, and ensure compliance with stringent regulatory standards.

Whether you’re managing compressed air, natural gas, or other industrial gases, the ABB FMT430 offers a dependable and efficient solution to streamline your operations and improve system performance.

PRODUCT DETAILS

• cFMus (Class 1 Div. 2 / Zone 2)
• Gas Mixtures with Max. 23.5 Vol% O
• 263 mm (10.4 in.) / AISI 316Ti SST (1.4571)
• Integral / Dual Compartment / Aluminum / 3 x NPT 1/2” NPT
• Current Output 1 (Active or Passive), Digital Output 1 & 2 (Passive, HART, MODBUS 24VDC, +/- 20%)
• With Push Buttons and Display (TTG) and Glass Cover
• 5-Point Calibration, Standard Measuring Range, Incl. Factory Certificate
• Adhesive Label with TAG No.
• VeriMass SensorCheck Function

FMT430-003

• Ceramic Sensor Elements / Standard Temperature Range -2
• Compression Fitting, Stainless Steel, 1 in. NPT, Nominal Pressure 2 MPa (20 bar, 290 psi)

FMT430-101

• Ceramic Sensor Elements / Low Temperature Range −40 to 150°C (−40 to 302°F)
• Compression Fitting, Stainless Steel, 1 in. NPT, Nominal Pressure 2 MPa (20 bar, 290 psi)
• Parameters Set to Factory Default
• Extended −40 to 70 °C (−40 to 158 °F) (in Preparation)

FMT430-105

• Ceramic Sensor Elements / Standard Temperature Range -20 … 150deg C (-4 … 302deg F)
• Flange DN 25, Nominal Pressure 4 MPa (40 bar, 580 psi)
• Integral / Dual Compartment / Aluminum / 3 x NPT 1/2 in.
• O&G Configuration
• 2 Applications
• Pipe Component FMT091, Wafer Design, for SensyMaster FMT230, FMT250, FMT430, FMT450
• Standard
• DN 50 (2 in.)
• Flanges ANSO / ASME B16.5 Class 150, Schedule 40 S
• Flange DN 25, Nominal Pressure 4 MPa (40 bar, 580 psi) with Centering Pin
• Stainless Steel AISI 316Ti (1.4571)

RESOURCES

RELATED PRODUCTS