ABOUT THIS PRODUCT
Edge Block and Bleed Valve is offered in 1/2″ male NPT x 1/2″ female NPT (National Pipe Thread), max pressure: 10,000psi, handle: T type 304 stainless steel, bonnet: 316 stainless steel, handle bolt: 304 stainless steel, valve stem: 316 stainless steel, hard seat, dust cap: plastic, valve body: 316 stainless steel, locking nut: 304 stainless steel, bleeding bolt: 316 stainless steel at two sides, one is block, another is bleeding, includes: smaller bleeding bolt, metal to metal sealing, packing gland: 316 stainless steel, orifice size: 0.236″ (6mm), packing: Teflon as standard, (optional, Viton), temperature range: minimum: -65 deg F (-54 deg C) maximum: 450 deg F (232 deg C). * Needs to be purchased with item -81301 (Bleed Valve RBSS-NS4)
PRODUCT DETAILS
Edge Block and Bleed Valve 3NV12M12FSS: Intended to isolate the pressure gauge from the measured fluid or to provide a means of throttling or dampening pressure pulsation. It allows additional instrument connections without adding permanentpiping.
- 1/2″ male NPT x 1/2″ female NPT (National Pipe Thread)
- Max pressure: 10,000psi
- Handle: T type 304 stainless steel
- Bonnet: 316 stainless steel
- Handle bolt: 304 stainless steel
- Valve stem: 316 stainless steel
- Hard seat
- Dust cap: plastic
- Valve body: 316 stainless steel
- Locking nut: 304 stainless steel
- Bleeding bolt: 316 stainless steel at two sides, one is block, another is bleeding
- Includes: smaller bleeding bolt, metal to metal sealing
- Packing gland: 316 stainless steel
- Orifice size: 0.236″ (6mm)
- Packing: Teflon as standard, (optional, Viton)
- Temperature range: minimum: -65 deg F (-54 deg C) maximum: 450 deg F (232 deg C)
- * Needs to be purchased with item -81301 (Bleed Valve RBSS-NS4)