ABOUT THIS PRODUCT
The Conspec CX Series is your fixed gas detector solution for toxic or combustible gas monitoring in hazardous or classified locations. The CX Series is available with an analog 4-20mA output, dry relay contacts, & Modbus RTU over RS-485 communications. The CX Series can detect over 100 different gases by supporting over 35 different types of sensors.
PRODUCT DETAILS
The CX Series CX0503-MIR has a simplified calibration procedure allowing for a quick, non-intrusive, adjustment free, field calibration of both Zero and Span set-points. It also offers 4-20 mA output, and programmable relay outputs for Fault, Alarm 1, and Alarm 2.
Enclosure: Explosion Proof – FM, CSA Listed
Compliance: Class I Div 1, 2, Class II Div 1, 2, Class III NEMA 4X
Power Input: 24VDC 100mA
Input: MIR Sensor
Current: 100 mA
Standard Output: 4-20mA
Conduit Entry: One – 3/4″ Cable Grip
Temperature: -20 Deg C – 50 Deg C (-4 Deg F – 122 Deg F)
Modes: Calibration, Normal, Setup
Display: LCD Display with two line character alphanumerical
Alarms: Alarm 1, Alarm 2 and Sensor Fail